Skip to main content

Open EP Mapping Lab

How electroanatomic mapping systems work, from membrane current to color map

A unipolar and five bipolar electrograms along a decapolar catheter A planar wave travels from the distal pair CS12 to the proximal pair CS90. The distal unipolar channel shows a positive then negative deflection; each bipole shows a sharp deflection, 7 milliseconds after its neighbor, on a light grid like recording paper. CS1 uni CS12 CS34 CS56 CS78 CS90 10 ms
A planar wave passing a decapolar catheter at 1 m/s: the distal unipolar signal, then five 2-mm bipoles from distal to proximal, each at its own gain. Computed with the model from module m03, not drawn by hand.

Education only. Nothing here is for diagnosis, treatment or any clinical decision. Read the disclaimer before relying on any content.

A free, open course for engineers joining EP device companies, clinical mapping specialists, EP fellows and researchers. It follows the signal the whole way: how a mapping system finds the catheter, records and filters electrograms, and turns them into activation and voltage maps.

How each module works

  • Derivations you can check. Every equation has a test in code.
  • Live figures you can change, each labeled as exact, simulation, approximate model or schematic, with its assumptions listed underneath.
  • A runnable lab in Python, with GNU Octave versions for the math foundations.
  • A cheat sheet, interview questions and a self-check, plus a public errata log.

Status

The pilot module, m03 · Unipolar, bipolar and omnipolar electrograms, is being written in six stages, each reviewed before the next. Its page shows how far it has got. The other 35 modules are planned; the course map lists every module, its status and its planned release.

Built on

The course format is inspired by OpenUltrasoundLab.

License

Text and figures: CC BY 4.0. Code: MIT. Datasets keep their original licenses.